Rear Wing End Plates
We offer an everso slightly different shape instead of the heavy steel original items. These are also made in extremely
high quality 2/2 twill vacuum infused 'high gloss' carbon fibre (both sides). They weigh naff all so gain a little increase
in power to weight ratio into the bargain !!!
Pair of Wing End plates - £175
REAR DIFFUSER
We spoke with an motorsport aerodynamics engineer before we went ahead with this modification.
The angle of the standard rear diffuser is within the 7 to 14 degrees that is commonly agreed to be beneficial.
Adding further elements is known to assist in the channelling of air from the back of the car and thus increasing stability.
4 elements of similar design can be seen on the new M15 and Rossian. (new US Noble)
Our elements are the same shape as the outer 2 and can be supplied for own fitment or you can send
us your diffuser and we will modify it for you and return within 7 days.
Pair of additonal elements (supply only) - £ 175
Supply, fit and repaint - £ 275
Engine Vent Trims
We thought the engine vents on the rear deck looked a little unfinished so we decided to make some
Carbon Fibre trims to bring things up to scratch. Not as easy as it sounds though because to ensure fantastic accuracy they
have to be cut on a water cutting machine.
From initial design, measuring and almost cutting fingers off holding the superlight carbon down we are
extremely happy at the result. A simple but effective little mod, one of our most popular, they look just as
good on the dark or light colours.
Very simple to fit - just peel off the ultra-thin adhesive strips on the underside, line up and
stick them down. There will be no visible gap between the trim and the bodywork and the carbon sheet is just 0.5 mm thick
so they look like they came from the factory that way. Can be removed without damaging paintwork - not that you'll want to
!
1 set of 4 2/2-twill resin infused Carbon Fibre trims - not
available at present
Door Mirrors
Besides Improving on certain design elements of the Noble M12 / M400 one particular aim of ours was to make
parts to replace those items robbed from the Ford & Rover parts bins. Visually the Rover door mirrors aren't the best
lloking , even my Granny recognised them as the same as those on her Rover 25 !! Add to this the fact that they constantly
seem to move out of alignment and we need a solution. The process took numerous man hours to develop and refine the design,
swivels and mounts. Our replacements are far more aesthetically pleasing and not fitted to any other road car. Tested in excess
of 140mph (on our private track!) and proven to be rock steady. They can be folded in towards the car if your parking space
is particularly tight and use the original bolt holes so no other mods are necessary. No longer internally operated but they
won't move - so you wont have to !! Supplied with all mounting hardware in primer.
1 x pair Door Mirrors and all fittings - £375
